View Post

Don Shoots His First Precision Rifle Match

In Blog by Don3 Comments

Hey everyone it’s your favorite Langobard from the Lands of the North again. It’s confession time. There’s something I’ve been keeping from all of you. It’s important considering our subject material here at Accuracy-Tech. Are we ready for this? Here it goes. Until recently I had never shot in a …

View Post

Ruger Precision Rifle Part 3: Swapping Ruger Precision Rifle Barrel

In Blog by Don31 Comments

Hey everyone, it’s the bearded Batavi again. Today I’m bringing you guys a bit of information that has the potential for saving you a few days of aggravation if you’re looking at changing some parts on your Ruger Precision Rifle. Specifically I’m going to talk about swapping Ruger Precision Rifle Barrel. If I’d known then what I know now I would have saved myself about two days of annoyance, and at least one busted knuckle. Once again this is a case of “See that man over there? Be nothing like him!”

View Post

The Ruger Precision Rifle: Part 2

In Blog by Don49 Comments

Hey guys, it’s your favorite Vandal from the land of the ice and snow again. Once again I’m going to be talking about the Ruger Precision Rifle. This time though it’s going to be about what I did with mine, as well as my experience thus far with it. Strap …

View Post

Getting Into Long Range Shooting: Part 2

In Blog by Don4 Comments

So this is part two of my getting into long range shooting series. Would it surprise you to learn I just about canned my first article based on my experiences? Well it was a very close thing, but I decided to let my story be a lesson for anyone else …

View Post

Top Posts of 2015

In Blog by Rich2 Comments

So here’s another first for us, the Top Posts of 2015! This is based on traffic to the AccuracyTech website, which increased approximately 600% this year over last year. That may or may not sound all that impressive, but it actually had increased 300% last year over the year before. So not only is traffic increasing, year after year, the rate of the increase is getting higher as well. These were the top ten most frequently visited articles. You may have seen some earlier as they were published. This is a chance for people to catch up on the top posts of the year they may have missed. I’m also going to talk briefly about why we believe we’re seeing these articles receive so much traffic!

View Post

6.5 Creedmoor Vs 308 Winchester

In Blog by Rich114 Comments

Occasionally we go over a topic here that we get repeated and continued interest in, like the 6.5 Creedmoor Vs 308 Winchester debate. We discussed this a bit in an article on the 6.5 Creedmoor as a good caliber for beginners. Now, due to continued interest in the 6.5 Creedmoor Vs 308 Winchester debate, we’re going to delve a little deeper into the ballistics side of this argument. I also plan to illustrate factory ammo price differences and availability. We’re probably even going to do a cost projection over the usable service life of the barrels and hopefully end the 6.5 Creedmoor Vs 308 Winchester debate, once and for all.