View Post

Precision Reloading – Cleaning Brass

In Blog by RichLeave a Comment

As we publish articles in our series on Precision Reloading we’re going to attempt to do them in a logical order that mirrors the precision reloading process. For that reason the first article that delves into the precision reloading process itself, after defining what it is in the first article, is going to be on the subject of cleaning brass. That might seem strange, but there’s a reason for it. You want to start your precision reloading process with some sort of cleanup of your fired cases. That way as you lube them and run them through sizing dies you aren’t forcing dirt and small pieces of stone and other gunk up into the dies. You want to keep the dies clean and free of burrs or gouges on the interior.

View Post

Accurate Reloading Data

In Blog by RichLeave a Comment

So you plan to do some handloading or reloading for your rifle? Have you thought about where to start with regard to powder charges and how to do it safely? One of the biggest challenges is establishing safe starting points for load development. There are many sources of information about where to start available to reloaders, some are trustworthy and others aren’t. This post is going to discuss potential sources of reloading data to use to safely execute load development for your rifle. Safety is the paramount concern and will be the focus in this article, we want our readers to do things correctly, and that means doing it safely!